SDN and Legacy Network Infrastructure | Enterprise Networking Planet (2024)

Enterprise Networking Planet content and product recommendations are editorially independent. We may make money when you click on links to our partners. Learn More.

Every new technology is fueled by a vision, a new world of future possibilities that can’t even be imagined if things stay the same as they are now. The trouble is that these visions tend to gloss over the often painful and convoluted process of getting from here to there.

This is where we’re at with software defined networking (SDN). On the surface, it is hard to argue against the digital nirvana on offer: on-demand provisioning, automated load balancing, streamlined physical infrastructure and, best of all, the ability to scale network resources in lockstep with application and data needs. Coupled with the ongoing virtualization of servers and storage, SDN ushers in no less than the completely virtualized data center, where end-to-end compute environments will be deployed and decommissioned on a whim.

Unfortunately, legacy network infrastructure – primarily a mixed bag of vendor, platform and protocol solutions, each initially deployed in response to short-term challenges – makes reaching the ultimate goal of an integrated, orchestrated network ecosystem a long, difficult process for many organizations. At best, we can take comfort in the fact that it is certainly feasible, though perhaps not optimal, to implement SDN on existing physical infrastructure.

“In terms of the physical layer, I don’t think SDN deployment will be a big issue,” said Alex Henthorn-Iwane, vice president of marketing at QualiSystems, an IT infrastructure automation solutions provider. “The fundamental hardware connections – wires and fibers, closets, floor structure, backbones – those will stay the same. But when you start thinking about applying SDN to heterogeneous networks, several major issues arise.”

Topping the list, of course, is the wildly disparate array of network devices, which must all be brought to heel to redesign the system with any semblance of order. Essentially, there are two ways of doing this: rip and replace virtually all network devices in favor of a hom*ogenized infrastructure – either a single-vendor solution or through a common protocol like OpenFlow – or build an overlay network, in which an SDN-enabled controller communicates with legacy infrastructure through existing protocols like SNMP or BGP.

Naturally, this approach is a bit more complex than a single, overarching SDN solution, but it does have the advantage of bringing flexibility to legacy infrastructure fairly quickly. Juniper, for instance, offers an open source version of its Contrail controller, called OpenContrail, under the Apache license so it can be easily downloaded for virtual overlay applications. In this way, the enterprise can implement the rudimentary functions of a software defined network without even employing the OpenFlow protocol.

SDN and Legacy Network Infrastructure | Enterprise Networking Planet (1)

Juniper Contrail diagram

“Our controller uses XMPP to talk the virtual router, Contrail vRouter for the virtual switch, BGP for the control plane and other IETF protocols for physical infrastructure support,” said Aruna Ravichandran, Juniper’s vice president of marketing and strategy for software and SDN. “As long as the controller is built on open standards, there is no need to rip and replace the entire network.”

Ravichandran was quick to point out, however, that most large customers are more interested in building new SDN infrastructure from the ground up, primarily through converged, modular infrastructure devoted almost exclusively to cloud architectures. This is where Juniper’s new MetaFabric solution enters the picture. MetaFabric can act as the guiding principle for switching, routing, security, SDN and anything else that requires the support of an agile, dynamic network environment. In these instances, implementing SDN on legacy infrastructure becomes primarily a means to leverage that infrastructure for the new computing paradigm, rather than to build the new virtual data environment on the framework of the old.

This could emerge as a crucial distinction as SDN strategies crystallize over the coming year, since not everyone is convinced that deploying a simple overlay network on legacy infrastructure is a good idea. Cisco, for one, has made no secret of the fact that it views SDN as one piece of a broad network overhaul that will take years to complete, and that will require a range of hardware, software and service layer changes.

“If you look at any one technology and ask if that is the answer that takes you to this magical world, the answer is no,” said Phil Casini, director of product management at Cisco. “You could start with tunneling technology, and then the branch becomes problematic through the LAN. In this case, you have a short-term gain that turns into a long-term liability. The practical reality is that the enterprise is here with the networks they have built over the years, and these need to migrate at the component level, the fabric level and the policy level.”

This practical reality was the primary motivation behind Cisco’s acquisition of Insieme, recently relaunched as the heart of the company’s Application Centric Infrastructure (ACI) platform. As Frank D’Agostino, senior director at Insieme, noted, simply automating the configuration of a network overlay does not even come close to the full capabilities of a top-to-bottom SDN infrastructure.

“Other than the application owners themselves, the network team is only one to touch every end of that application,” he said. “The real value of SDN is to have visibility into that app wherever it goes, but you don’t get that with a network-based implementation where the physical network is simply recreated in a tunnel. So the real use case here is the benefits to the application tier that are relevant to the business, not the ability to recreate the network VLAN in software because, frankly, that won’t exist anymore.”

But if SDN will only provide optimal results under a revamped network infrastructure, how can enterprises struggling to control costs justify the full turnover of virtually all networking elements within the next few years? While server and storage infrastructure presented their fair share of challenges during the virtualization transition, networking is in an entirely different league by virtue of its sprawling, often convoluted footprint and the fact that most network devices have a relatively long lifecycle. These factors put even more pressure on CIOs to maximize ROI before swapping them out. And how much will this process disrupt current operations?

At best, it seems we are in a classic development pause, in which the new technology has been introduced and now the challenge is to figure out the best way forward.

“The basics of technology architecture deployment still apply [with SDN] – things like due diligence, assessing the true cost of ownership,” said QualiSystem’s Alex-Henthorn. “But it’s not just about speeds and feeds anymore. The good news is that the cloud and virtualization have brought concepts of system development and agile operations forward, and this sort of thinking needs to be applied to the network.”

Legacy networking infrastructure, then, will have a role to play in the SDN future, but it isn’t likely to provide the foundation – at least in its present form – for the truly agile network architecture that enterprises say they need to maintain a competitive edge.

Header photo courtesy of Shutterstock.

SDN and Legacy Network Infrastructure | Enterprise Networking Planet (2024)

FAQs

What is legacy network infrastructure? ›

A Legacy Network refers to an old methodology, technology, computer system, or application program that continues to be used, typically because the user (usually a business) does not want to replace or redesign it. These systems, though outdated, continue to be critical for certain functions.

How is SDN different from enterprise conventional network? ›

Unlike SDN, traditional networks use routers, switches and other hardware and physical infrastructure to generate connections and run the networks. SDN controllers use a northbound interface that communicates with APIs, allowing application developers to program the network.

What is the difference between SDN and NMS? ›

At a basic level, NMS/EMS provides mechanisms to manage the elements and resources that form the network. Inventory, faults, configuration, performance and other attributes are the concern of *MS. SDN, on the other hand creates, monitors and manages the network itself.

What is SDN in computer networking? ›

Software-Defined Networking (SDN) is an approach to networking that uses software-based controllers or application programming interfaces (APIs) to communicate with underlying hardware infrastructure and direct traffic on a network.

What is an example of a legacy network device? ›

IPX, SNA, AppleTalk and DECnet are examples of legacy networks. See legacy LAN, IP network and IP on Everything.

What is a legacy network connection? ›

A legacy network refers to an outdated computer system or technology that has been replaced by newer systems.

What are the disadvantages of SDN? ›

Disadvantages of SDN

It requires a change in the entire network infrastructure to implement SDN protocol and SDN controller. It requires a complete reconfiguration of the network. This increased cost due to reconfiguration. Staff Needs to be trained.

What is the basic principle of SDN in a network? ›

An SDN architecture delivers a centralized, programmable network and consists of the following: A controller, the core element of an SDN architecture, that enables centralized management and control, automation, and policy enforcement across physical and virtual network environments.

What are the key elements of SDN? ›

A typical representation of SDN architecture comprises three layers: the application layer, the control layer and the infrastructure layer. These layers communicate using northbound and southbound application programming interfaces (APIs).

What is the difference between SDN and OSI model? ›

OSI Layer:

This allows for greater control over network traffic and enables administrators to configure and manage the network more easily. At the Network Layer, SDV involves the use of software-defined networking (SDN) to manage network traffic and provide visibility into the network.

Where can SDN be used? ›

Software-defined networks are increasingly used in large data centers. A data center is a collection of servers and networking equipment, typically within a single building, which stores, processes, and exchanges data.

What is the difference between SDN and virtual network? ›

Software-Defined Networking and Network Virtualization differ in the separation of functions and resources. SDN isolates physical networking resources. These resources can be switches and routers. Moreover, it shifts decision-making to a virtual network control plane.

What are the two main challenges of SDN? ›

Although SDN is a favorable solution for IT and cloud providers and enterprises, SDN faces some challenges that hinders its performance and implementation. The list of SDN challenges consists of: Controller placement, Scalability, Performance, Security, Interoperability and Reliability [6].

What are the three layers of an SDN? ›

Layers of Software Defined Network Typically, there are three different types of components in the SDN model: a remote centralized controller, network devices such as switches, and a communication protocol such as OpenFlow protocol [6].

How is SDN different from traditional networking? ›

Unlike traditional networks, which rely on dedicated hardware devices for controlling network traffic, SDN employs software-based controllers or application programming interfaces (APIs) to communicate with the underlying hardware infrastructure to direct traffic flow on a network.

What is legacy mode in networking? ›

Legacy networks have a single global IP address range that cannot be divided into subnets. VPC networks are divided into subnets. With VPC networks, each Google Cloud region can have zero or more subnets. It is not possible to create regional subnets with a legacy network.

What is an example of a legacy system? ›

A common legacy system example is Microsoft's Windows 7, which was released in 2009 and was no longer supported after 2020. Other examples are Adobe Flash and IBM's mainframe systems, which are still used by many large corporations for their critical business operations. What are the risks of keeping legacy software?

What is the key difference between legacy and 5G network? ›

1 2 5G is virtuaized whereas Legacy is hardware driven Legacy is service oriented whereas 5G isn't Legacy is Simple policy based operation SG is more scalable Legacy is flexible network 4 5 Q.

What does legacy mean in cyber security? ›

A legacy system is any outdated computing system, hardware or software that is still in use. Legacy systems include computer hardware, software applications, file formats and programming languages.

References

Top Articles
Latest Posts
Article information

Author: Foster Heidenreich CPA

Last Updated:

Views: 5982

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Foster Heidenreich CPA

Birthday: 1995-01-14

Address: 55021 Usha Garden, North Larisa, DE 19209

Phone: +6812240846623

Job: Corporate Healthcare Strategist

Hobby: Singing, Listening to music, Rafting, LARPing, Gardening, Quilting, Rappelling

Introduction: My name is Foster Heidenreich CPA, I am a delightful, quaint, glorious, quaint, faithful, enchanting, fine person who loves writing and wants to share my knowledge and understanding with you.